Forklift loading a wrapped machine into a 40-foot container at the E-SHION plant.
Home/Case Studies/Three-layer IBC blown film line
Project configuration
Three-layer IBC blown film line
A three-layer co-extrusion line with internal bubble cooling for converters who need high clarity, uniform gauge and good sealing performance in one film — snack pouches, frozen food bags and packaging with barrier layers.
Project configuration
Project configuration
Typical configuration from our project base. Exact values are confirmed in the proposal for your line.
| Parameter | Details |
|---|---|
| Max. output | 500 kg/h |
| Film width (folded) | up to 2,600 mm |
| Thickness range | 0.025 – 0.15 mm |
| Gauge tolerance | ≤ ±5% |
| Extruders | SJ90/30 x1 + SJ75/30 x2 |
What the line includes
IBC internal bubble coolingAutomatic air ringOnline thickness gaugeDual-station winderDigital PID temperature control
How a project is delivered
From specification
to running line
A machinery project is a process, not a shipment. Four steps keep every installation on schedule.
01
Engineered to your spec
Material, film width, output rate and factory conditions define the line. Every component is confirmed in the proposal before production starts.
02
Built & factory tested
Machines are assembled and run with your recipe before shipment. Videos and test reports are shared so you see the line running before it leaves.
03
Installed & commissioned
Engineers supervise installation on site, run the first production trials and hand over a documented, tuned line.
04
Supported for life
24/7 technical support, structured operator training and OEM spare parts shipped globally — from first run to full production.
Shipment Log
From Our Shipping Floor
Machine secured inside the container with lashing straps and wooden chocks.
A wrapped extrusion line being loaded into the container for export.
Container sealed and ready for departure — machines shipped worldwide.
Buyers ask
Before you start
a project
Can you share customer references?
Yes, on request. The typical configurations above show what we build; for your market we can arrange direct references, a factory visit or a video walk-through before you order.
Do you provide installation and commissioning?
Yes. Our engineers supervise installation on site, run the first production trials and hand over a documented, tuned line, worldwide.
How fast is your technical support?
24/7 support line to our engineering team in more than 50 countries, average first response within 4 hours on business days.
How quickly can I get spare parts?
Original spare parts - screw elements, die rings, sealing bars, drives and control boards - are shipped globally; urgent parts are dispatched within 48 hours.
Can you upgrade my existing line?
Yes. Line modernization adds co-extrusion heads, servo drives or process controls to raise output and cut waste without replacing the whole line.
Get your custom solution
Your project,
engineered next
Tell our engineering team your output target and facility conditions. We design and build machinery to match — average response time 4 hours.
Start Your Project →
Call us directly+86 151 6778 9726
WhatsApp
Email usdoris@e-shionmachine.com
Reply within 24h
AVERAGE RESPONSE TIME — 4 HOURS